Catalog Number |
Description |
Price |
| |
|
|
NEW Product!!
Perfect Loops for Ultrathin and Large sections. New Product!! |
| |
11170 |
Inoculating Loop - Total length 11 inches. Handle 8 inches long. Loop has 1/8 inch ID. Wire 0.02 inch. Package of 3. |
$10.95/pkg |
23625 |
Glass Micro Spray Nebulizer - Designed to atomize drops of liquid as small as 0.1ml. Invaluable in preparation
of virus or protein suspensions, etc. Autoclavable.
|
$295.00 |
11380 |
Diamond Marking Pencil
- Excellent for marking microscope slides at the work bench and for labelling backs of photographic slides in the dark room.
Useful in scoring glass for glass knives. Will scribe metal surfaces clearly.
|
$29.95 |
51620 |
Small Flamer
- For holding aperture discs or strips while flaming. Small discs can be flamed in the 3/16" diameter cup made from 6 mil platinum foil with 1/32" diameter hole in bottom to induce good flow of air. Cup is attached by 30 mil platinum wire to heat resistant handle. Aperture strips can be hung from the hook for flaming.
|
$315.00 |
51625 |
Large Flamer
- For holding 1/4" to 1/2" diameter aperture discs while flaming. Flat pan is made from 6 mil platinum foil with 1/32" diameter hole in bottom to induce an adequate air flow. 30 mil platinum wire attaches the pan to a heat resistant handle.
|
$380.00 |
22325 |
Jeweler's Saw - Especially useful for accurate trimming of large embedding blocks, as well as for many other laboratory uses. |
$19.50 |
22326 |
Saw Blades for Jeweler's Saw - Replacement blades for Cat. No.: 22325. Package of 12. |
$15.95 |
23135 |
Glass Scorer/Cutter - Wheel type, for making glass knives. |
$10.75 |
23140 |
Glass Pliers - Unique pliers, 203 mm long, with fine adjusting screw, produce clean, smooth edges on glass up to 9.5 mm thick with a mere squeeze of the handles.
|
$48.95 |
11400 |
Standard Loop
- Stainless steel. Specially formed for conveniently lifting specimen grids with film from water surface for placement on Standard Peg Drier (No.: 11390). |
$38.95 |
11405 |
Thin Loop
- For use with No.: 11395. Loop is of particular value in orienting a section on a grid. Made from 10 mil nichrome wire fitted into an etched hexagonal aluminum handle for lifting microtomed sections from aqueous solutions without damage. Section rests on a droplet of liquid supported by the loop, thus eliminating tearing or twisting during processing. Specially proportioned to enter microtome boats easily, as well as fit over pegs of special specimen peg drier. Particularly helpful in freeze fracture techniques.
|
$39.25 |
11405L |
Loop Only - For Thin Loop (11405) above. |
$23.25 |
11410 |
Protective Stand for Thin Loop
- Blue high impact plastic with precisely sized groove down the center to support the special loop while not in use. Use of the stand prevents damage to the loop. |
$12.95 |
64040 |
Coater Handle
- Vinyl coated handle with prongs for holding Polaroid black and white print coater. Keeps hands clean while coating prints. |
$10.50 |
11135 |
Circular Pocket Mirror
- 22 mm diameter, overall length 190 mm. Universal ball joint allows viewing at any angle. Insulated vinyl grip. |
$21.50 |
| |
|
Hex (Allen) Wrench Sets |
|
Professional quality fold-up, pocket sized sets made from tempered alloy steel. Manufactured to close tolerances with sharp hex corners to insure
precise fit into hex sockets. Sizes stamped on handle. |
11295 |
7 Piece Metric Hex Wrench Set - Includes 1.5, 2.0, 2.5, 3, 4, 5 and 6 mm sizes. |
$12.95 |
11296 |
9 Piece English Hex Wrench Set - Includes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4" sizes.
|
$15.95 |