Low Speed Diamond Wheel Saw
for wheels up to 7" in diameterCatalog # L660
Price: $8,925.00
The Model L660 is designed to be a multipurpose precision
saw using diamond wheels up to 7" in diameter. Its' low speed allows it to cut all materials traditionally cut with a high speed diamond wheel while also cutting very fragile and soft
materials with minimal subsurface damage. A variety of sample holders provides a means to mount any shape sample while goniometer adaptability simplifies the cutting of orienting crystals. Features:
An internal optic sensor and belt drive system eliminate broken gears and sample damage by terminating the cutting process when wheel rotation is impeded.
Coolant reservoir is lowered and easily removed by opening an access door located on the front panel. Operation: A sample is mounted to a sample holder and attached to the arm. An
appropriate load is applied by adjusting the counterbalancing weight and the automatic stop switch is set. Using a coarse adjustment the sample is positioned in any starting
position relative to the diamond wheel and then a micrometer is used for precise sample positioning. With the diamond wheel rotating slowly and coolant in the reservoir, the arm is
gently lowered until the sample touches the diamond wheel. Cutting will continue until the automatic cutoff switch is triggered. Cutting Wheels: The model L660 is designed to cut with diamond, CBN and abrasive
wheels. Diamond wheels are used for most applications while CBN wheels are primarily used for cutting ferrous based materials. Abrasive wheels (Al2O3
and SiC) can be used for cutting both ferrous and nonferrous based materials and have also been used for dry cutting of superconductor materials. Ladd provides a wide selection of cutting wheels and
the separate consumables catalog provides details on selecting the proper cutting wheel for your application. Specifications:
Dimensions:
15" W x 13" H x 15" D
Net Weight: 39 lbs.
Wheel Rotation: 0-250 rpm
Wheel Diameter:
3"(75mm), 4"(100mm), 5"(125mm), 6"(150mm) & 7"(175mm)
Maximum Sample Diameter: 2.8" (71mm)
Specimen Load: 0-2000 grams
Spindle Diameter: 0.5" (12.7mm)
Micrometer Feed: 0-1.000", 0.001" increments or 0-25mm, 0.01mm increments
Reservoir Capacity: 1200ml
Electrical Input: 100VAC 50/60 Hz, 115VAC 50/60 Hz or 220VAC 50/60 Hz
All of the following components are included with the Model L650 Wheel Saw:
Cat. No.: L66001 - Single axis goniometer
Cat. No.: LDWH7202 - Diamond wheel (7" x 0.020")
Cat. No.: L02416 - 2.4" Support collars (2 each)
Cat. No.: L03636 - Arbor spacer (1.5")
Cat. No.: L03632 - Arbor spacer (0.5")
Cat. No.: L01034 - Mounting block kit*
Cat. No.: L02460 - Water soluble coolant (1 qt)*
Cat. No.: L0722 - Wheel dressing stick*
Cat. No.: various - Various mounting waxes*
*See consumable price list for consumable items |
